The first week Ray used a waterproof cover on his lift recliner, the pad slid forward every time the chair pushed him up. He would get halfway to standing with a wad of quilted fabric bunched behind his knees, and twice I watched him grab the side table to steady himself. The second time it happened I took that cover off, folded it, and put it out in the garage on top of the paint cans. Since then I have been through four covers on one chair in three years. The H.VERSAILTEX stretch cover is the only one that was still on the chair a month later, and the only one Ray has not asked me to take off.

That is not a knock on waterproof covers. They do a job nothing else does, and if you are caring for someone with bladder trouble, or a chair that sees a dinner plate and a coffee mug every night, you need one. But most of the people I helped over 24 years as a home health aide did not need a waterproof cover on a lift chair. They needed something that stayed put while the chair did the one thing it was bought to do.

The Short Answer

Buy the H.VERSAILTEX cover if the chair stays dry, one person uses it, and the thing that drives you up the wall is a cover that creeps and bunches every time the lift runs. Buy a waterproof cover if there is a real chance of liquid getting on that seat: incontinence, a shaky hand with a hot drink, or a chair that doubles as a dining table. The H.VERSAILTEX cover is a stretch jacquard, 85% polyester and 15% spandex, made to pull over the whole chair in one piece. A waterproof cover is a quilted pad with a laminated backing. Those are two different problems, and the common mistake is buying for the wrong one. Nobody in the store will ask you which problem you have, so you have to ask yourself before you get to the register.

H.VERSAILTEX stretch coverA waterproof cover
Getting it over the chairOne piece, 85% polyester and 15% spandex, stretches over the back and seatQuilted panels with little give, drapes rather than stretches
A spilled drinkFabric only. It beads for a second, then soaks inLaminated backing holds the liquid on the surface while you reach for a towel
Staying put while the lift runsTwo elastic loops at the back corners pull under the seatUsually an elastic strap across the back, and it can need re-tucking after a few cycles
Size rangeOne size. Back circumference 78 to 88 inches, sitting width 24 to 33 inchesOften sold in several sizes, which suits an oddly shaped chair
Feel against your armsSoft thick jacquard with a small woven check textureQuilted, and it can feel slick or slightly stiff where the backing sits
Washing itMachine wash, 2 pounds, goes back on wet or dry without a fightMachine wash, though the backing can crack with repeated cycles
Incontinence or a chair that gets wet oftenThe wrong tool for this jobExactly what it was built for
Wear from walkers, buckles and platesStretch fabric will snag and thin over timeThe quilted face takes the abrasion better
How it looks in the living roomReads like upholsteryReads like a protective pad
Two hands smoothing a fabric cover down over the back of a power lift recliner, with the seat cushion visible below

Where the H.VERSAILTEX Cover Wins

The fit is the part that matters on a lift chair, and this is the one place where H.VERSAILTEX gives you an actual number to check before you order. The cover fits a back circumference of 78 to 88 inches and a sitting width between 24 and 33 inches. I measured Ray's chair with a cloth tape the way I used to measure doorways for clients, because a cover that comes up 3 inches short will pop off the back the first time the chair reclines. It took me two tries. The first time I ran the tape across the widest part of the arms instead of the seat itself and got a number 4 inches too big, which is the kind of mistake that gets a cover returned. Measure the seat between the arms, then run the tape around the back at the widest point, and write both numbers on the back of a grocery receipt. Ours landed inside the range both ways, and the cover went on in about four minutes, alone, with a stiff lower back.

The second win is that it does not fight the mechanism. The seat has two elastic loops at the back corners that pull under and hold the whole piece down. When the lift raises the seat and tips it forward to meet Ray halfway, the fabric stretches with the movement instead of sliding ahead of it. That is the whole reason I stopped shopping. He stands up on his own again without a folded-up cover under his thighs, and I am not fixing the back of the chair three times a day. Before this cover, our mornings had one predictable step in them. Ray would get up, I would hear the fabric shift, and I would walk over and pull the back corners down again before he sat down for breakfast. That is a small thing that becomes a large thing when it happens every day for three years.

Four covers in three years. The stretch one is the only one that was still on the chair a month later, and the only one Ray has not complained about.

Third, it feels like furniture instead of a protective pad. The material is soft and thick, with a small woven check through it, and it is heavy enough at 2 pounds to hang properly instead of clinging. There is a side pocket that swallows the remote and the TV guide, which sounds small until you have watched someone dig between the cushion and the arm for a remote with a bad hip. It is machine wash, and that matters more than people think. A cover you are afraid to wash is a cover you live with dirty, and after one winter of Sunday afternoon naps in that chair, this one needed the wash.

Where a Waterproof Cover Wins

A waterproof cover wins the argument it was built for, and I want to be straight about that. A drink goes over and the liquid sits on the surface while you walk to the kitchen for a towel. On the H.VERSAILTEX cover a spill beads for a second and then goes into the fabric, and now you are pulling the cover off and running it to the machine. When I was working, I had clients with bladder problems whose chair got wet twice a week. One woman over in Powell had a chair we kept under a quilted waterproof pad, and that pad earned its keep every month of the four years I visited her. For those homes I would not have recommended a stretch cover. Not once.

Waterproof covers also take a different kind of abuse. A quilted face with a backing shrugs off a walker being dragged across the seat, a belt buckle, a plate balanced on the arm because the side table is too far away. And there is an honest size argument on their side. Many come in small, medium and large, so a chair outside the range the H.VERSAILTEX cover was cut for can still be covered. If your chair is unusually narrow or unusually wide, measure the back and the seat, write the numbers down, and read the chart twice, because one size is one size. A chair that came out of the factory in a shape nobody stocks is exactly the chair a three-size waterproof pad saves you from.

If the chair stays dry, this is the cover that stays on it

Elastic loops at the back corners, a stretch jacquard that moves with the lift mechanism, machine wash, and a side pocket for the remote. Fits back circumference 78 to 88 inches and sitting width 24 to 33 inches.

Check Today's Price on Amazon →
An older woman setting a mug on a side table next to a recliner in a carpeted living room, an afghan folded over the chair arm

How the Lift Mechanism Changes the Math

A lift chair is not a sofa, and a cover that works fine on a sofa can fail here. The seat lifts and tips forward to meet the person halfway, and it does that dozens of times a day. Any cover that relies on gravity and a good tuck is going to lose that fight by Thursday. This is why I care about the two elastic loops more than I care about anything printed on the package. They are the difference between a cover that moves with the chair and a cover you re-tuck with your foot.

It is also why I would rather have a stretch fabric than a stiff one. The 15% spandex lets the cover follow the back as it comes up instead of pulling loose at the top corners. In our house the routine is simple. I pull it off every other Sunday, wash it on a normal cycle, and it goes back on without two people and a fight. A cover that takes 20 minutes to reinstall is a cover that ends up in the garage next to the waterproof pad, and I have been that person. There is one more thing worth knowing. The closure is elastic, so there is no zipper to line up and no ties to knot, which sounds like a small convenience until your hands are the reason you needed a lift chair in the first place.

What Neither Cover Fixes

No cover makes a chair easier to get out of. If Ray had needed to push up with both arms, the problem would have been seat height and cushion firmness, not fabric. Before you buy either cover, sit in the chair in the position you actually sit in, with your shoes on, and check that your feet reach the floor and that the seat edge is not cutting behind your knees. I am 5 foot 3 and I sit in Ray's chair more than he likes. My feet reach the floor, but I have to hook my heels back to do it. That is the chair, not the cover, and no fabric is going to change it. In our living room the front door is 32 inches wide and the chair had to come through it, so measure that too before you blame a cover for a size problem.

Neither cover fixes the cord, either. Our one wall outlet sits behind the recliners, and that is where the lift motor plugs in, so the plug is behind the chair where nobody can reach it without moving furniture. Sort that out before you dress the chair. And if the remote keeps disappearing into the cushion gap, a side pocket helps, but a small hook-and-loop patch on the arm of the chair helps more. The pocket keeps it from falling through the seam. The patch keeps it from wandering off entirely when someone sets it down on the side table and then puts a magazine on top of it.

Who Should Buy Which

Buy the H.VERSAILTEX cover if the chair belongs to one person, that person is dry, and the complaint you keep hearing is about the cover sliding, bunching or looking like a hospital pad. It is also the right pick if the chair is a standard large power lift recliner and you can confirm the back circumference falls between 78 and 88 inches and the sitting width between 24 and 33 inches. Anyone recovering from a knee or hip replacement who is up and down out of that chair twenty times a day will notice the difference within a week, because that is the person the lift mechanism is working hardest for.

Buy a waterproof cover if there is incontinence, a catheter, a wound that weeps, or a hot drink in a shaky hand every afternoon. Buy it if the chair is also the dining room, or if a walker or a wheelchair gets dragged past the seat all day. Buy it if the person using the chair cannot tell you when something spilled, because that is the case where a stretch cover quietly soaks through and the cushion underneath is the thing that pays for it.

If you are honestly in both camps, buy the waterproof cover and put a washable throw over it for the hours when the chair is dry. That is what I would do in my own living room, and it is what I used to recommend to families who could not decide. Two layers, one of them cheap to replace, is a better answer than one cover trying to be both things. And if the honest answer is that the person needs a different chair entirely, no cover on the market will fix that. That is a conversation for the physical therapist, not the bedding aisle.

Measure the back and the seat, then order the stretch one

One piece, 2 pounds, machine wash, and two elastic loops that hold it under the seat while the lift runs. If your numbers land inside 78 to 88 inches around the back and 24 to 33 inches across the seat, this is the cover that stays on.

Check Today's Price on Amazon →