Ray's lift chair sits about four feet from the wall outlet, which is where it plugs in, and for the better part of two years that chair was also where he ate lunch. A retired machinist eats half his meals with his hands. Coffee went over the left armrest in March. Soup went down the seat in July. The chair kept working fine. The upholstery stopped looking like something you would want a guest to sit on, and I was not going to replace a power lift recliner over a stain.
I spent 24 years as a home health aide, most of it in other people's living rooms, helping folks get out of chairs and beds without a fall. You learn that a chair is a tool. You also learn that the chair a person actually loves takes more abuse than anything else in the house.
So when I went shopping, I wanted a cover, not a new chair. What I bought was the H.VERSAILTEX stretch lift chair cover, a one piece fitted slipcover in a thick jacquard knit that pulls over the back, the seat and the arms in one go. It is 85 percent polyester and 15 percent spandex, it weighs about two pounds folded, it has a small pocket on the side, and the fabric has a textured small check pattern. That is the whole description. No assembly, no tools, nothing that needs a husband with a screwdriver.
Here is the part I would want told to me first. Measure before you order. The fit range on the listing is a back circumference of 78 to 88 inches and a sitting width of 24 to 33 inches. I ran a soft tape around the outside of the chair back, wrote the number on the back of an envelope, then measured across the seat between the arms. Ours came in at 31 inches, comfortably inside the range. If you are shopping for a parent, get those two numbers before you spend anything.
Two elastic loops at the back corners pull under the seat and hold the whole thing down. That is the entire installation.
The four minute fix for the chair you are tired of apologizing for
One piece, elastic closure, machine washable. Measure the sitting width and the back circumference first, then match it to the size chart on the listing.
Amazon Check Today's Price on Amazon →Installation took me a little under four minutes. You drape it over the back, work the fabric down over the arms, and tuck the seat panel into the gap behind the knees. The two elastic loops at the back corners pull under the seat and hold everything in place. The first time Ray ran the lift function, the footrest came up and the fabric shifted maybe a quarter inch. I tucked it once more. After that it stayed put.
I want to be honest about the lift mechanism, because that is the question people ask me. The cover goes over the chair, not into it. The hand control stays where it was, on the side, and works exactly as before. The cover is stretch fabric, so when the chair reclines the material follows it down and relaxes back when it returns. On ours, the arm nearest the control needed a re-tuck about once a week for the first month. It has settled since.
Washing is the reason I stopped worrying about spills. It comes off in about a minute, goes in the machine, and goes back on still a little damp if you are as impatient as I am. Two pounds of fabric dries fast. I have washed the H.VERSAILTEX cover five times now, cold, and I see no pilling, no pulled seams, and no fading. The textured check hides a small spot in a way bare upholstery never did.
The side pocket is a small feature that turned out to be the most used thing in the room. Ray keeps the television remote in it. I keep a pen and a small notebook there so I can write down his blood pressure numbers without getting up. Before, all of that lived on the armrest and fell on the floor twice a day.
What I'd Tell You If We Were Sitting at My Kitchen Table
I would tell you to buy the H.VERSAILTEX cover for the right reason. It is protection. It is not a repair. It will not fix a cushion that has gone flat or a chair that lists to one side, and it will not make a chair easier to stand up from. That is the lift chair's job, and no slipcover has ever done it. I would also say plainly that stretch fabric and a waterproof pad are two different purchases. This handles a splash and a dropped spoon. A full mug poured into the seat will still get through, so put a waterproof pad under the cushion if that is the risk in your house.
The other thing I would say is measure twice, and if your numbers land near the top of the range, call it close and check the size chart twice before ordering. A cover that fights the chair will pop off the back corners every time the footrest comes up, and you will blame the cover instead of the fit. And if this is a gift for a parent who is proud and does not want to be fussed over, do not make a project out of it. Put it on while they are in the kitchen. It looks like the chair got new upholstery, nobody has to discuss it, and the coffee stays off the fabric.
Ray never said a word about it, which from him is a review. Two weeks in, a neighbor asked whether we had bought new furniture. That is the whole endorsement I have to give. A thick, stretchy, machine washable piece of fabric that fits the chair it says it fits, and it turned the one thing in this house I was embarrassed by back into a chair I am glad to sit in.
Measure the seat, measure the back, then order once
Current price, the full fit range and the care instructions are all on the listing. Machine wash, elastic closure, one piece over the back and arms.
Amazon Check Today's Price on Amazon →