The chair does the heavy lifting. The cover is what keeps it from looking like a piece of medical equipment and keeps the fabric underneath from giving out. I am Loretta Ainsworth. I am 68, I spent 24 years as a home health aide, and I live outside Knoxville with my husband Ray, who is 73 and had a knee replacement a couple of years ago. We have one power lift recliner in a 12 by 14 living room, and the H.VERSAILTEX stretch recliner cover has been on it long enough for me to know where it helps and where it does not. This is not a pitch for a new chair. It is ten practical reasons to put a cover on the one you already own.

If you are shopping for a parent, or if you are the one who uses the lift function every day, start with measurements and work backward. A cover that does not fit is worse than no cover at all, because it slides, bunches, and gives a person who is already unsteady one more thing to think about. The H.VERSAILTEX cover has a clear fit range, and that is where I would begin.

Put the cover on before the chair shows its age

The H.VERSAILTEX stretch lift recliner cover fits back circumferences of 78 to 88 inches and sitting widths of 24 to 33 inches. It goes on in one piece and comes off for the wash.

Check Today's Price on Amazon →
1

It takes the daily wear instead of the chair

A lift recliner gets more traffic than any other seat in the house. Ray is up and down from ours a dozen times before lunch. Every one of those sits and stands puts pressure on the same spot. The H.VERSAILTEX cover sits between him and the chair fabric. When the cover gets thin or stained, you wash it or replace it. When the chair fabric goes, you are buying a chair.

See the cover on Amazon →

An older man seated in a power lift recliner with a fitted stretch cover, one hand on the armrest, a side pocket within reach.
2

The stretch gives with the lift, not against it

A stiff throw draped over a recliner will bunch up every time the footrest comes up. This cover is 85 percent polyester and 15 percent spandex, and it is made in one piece for a power lift recliner. It moves with the chair because it has some give. I still smooth the seat after Ray gets up, but I am not fighting it back into place.

Check the stretch cover on Amazon →

3

The size range covers most standard large lift recliners

Before you order, measure. The cover fits a back circumference of 78 to 88 inches and a sitting width of 24 to 33 inches. I used a cloth tape around the back of our chair and across the seat where Ray sits. Our chair landed in the middle of that range. If yours is outside it, this is not the cover for you. That is not a defect. It is a fit.

Measure your chair, then check the fit →

4

Elastic loops at the back corners hold the seat down

The seat section has two elastic loops at the back corners. You pull them down over the back corners, and the seat stops sliding forward when someone pushes up out of the chair. This matters more than the fabric. A cover that slides is a trip hazard for a person who is already unsteady. I check those loops every couple of weeks, because they do the quiet work.

See the elastic seat detail on Amazon →

5

The side pocket keeps the remote where you can find it

Our remote disappears into the chair at least once a week. The side pocket gives it a home. I also keep a pair of reading glasses and a pen in ours. It is a small thing until you are standing over the chair with a flashlight, trying to find the button that puts the footrest down.

Check the side pocket on Amazon →

Close-up of hands tucking an elastic edge around the back corner of a recliner seat.
6

It goes in the washing machine

Spills happen. So does the general smell of a chair that has held a person every day for years. The care instructions say machine wash, and I have washed ours on a gentle cycle and let it air dry. I do not dry it hot. The elastic is what makes the cover fit, and heat is hard on elastic. Wash it before the chair smells like the chair.

See care details on Amazon →

7

It is light enough to put on without help

The cover weighs about 2 pounds. I am 5 foot 3 and I have a stiff lower back in the morning. I can take this off and put it back on by myself. The listing has guide photos, and the one piece design means you are not wrestling with three separate pieces. If you are the daughter or son doing this for a parent, you can manage it on a visit.

Check the cover on Amazon →

8

It hides the wear that makes a chair look older than it is

Lift chairs are built to last, and the fabric is often the first thing to look tired. The cover goes over the arms, the back and the seat, so it covers the spots that take the most oil and friction. It will not fix a broken mechanism or a sagging seat. It will make a sound chair look cared for again.

See the full cover on Amazon →

9

It lets you keep the chair a while longer

Ray's chair is not ready for the curb. The motor works, the frame is solid, and the lift still does what it should. The only thing that had given out was the look of the fabric. A cover buys time. That is worth something when the alternative is shopping for a new lift chair, measuring the doorway, and waiting for delivery.

Check today's price on Amazon →

10

It makes the chair look like furniture again

There is a point where a lift chair starts to look like a piece of hospital equipment in the living room. A fitted cover with a textured small check pattern softens that. Ours sits in a 12 by 14 room with a lamp and a side table, and it no longer looks like the odd piece out. That sounds like vanity. It is not. People sit longer and visit longer in a room that feels like a home.

See the textured cover on Amazon →

What I'd Skip

I would skip a cover sold as one size fits all with no measurements. I would skip anything that needs to be dry cleaned, because a chair cover that cannot go in the washer will not get washed. I would skip a thin sheet draped over the chair; it will slide and bunch and make the lift harder to use. And I would skip buying a cover to hide a chair that is already unsafe. If the lift stalls, if the frame is cracked, or if the chair rocks when Ray stands, the H.VERSAILTEX cover is not the answer. Fix the chair or replace it.

A cover will not fix a broken lift. It will keep a good chair from looking like it is ready for the curb.

Measure once, then cover the chair you already have

Back circumference 78 to 88 inches. Sitting width 24 to 33 inches. One piece, machine wash, about 2 pounds. If your chair falls in that range, the H.VERSAILTEX cover is a practical way to protect it.

Check Today's Price on Amazon →